HSNO Classes (2, 3, 4, 5, 6, 8 and 9) Training
HSNO Classes (2, 3, 4, 5, 6, 8 and 9) Training
Duration: 60 - 80 mins
Key Topics
Introduction to HSWA, WorkSafe and worker duties
Physico-chemical properties and health hazards
HSNO classifications and degrees of danger
Class 2 flammable gases
Class 3 flammable liquids
Class 4 flammable solids
Class 5 oxidisers
Class 6 toxics
Class 8 corrosives
Class 9 ecotoxic
Procedures (if applicable) for the safe use, handling, manufacture, storage and disposal
Control measures
Personal protective equipment (PPE)
Safety data sheets (SDS)
Emergency actions
Quiz questions (assessment)
Certificates
Certificates are issued once the course is successfully completed
There is no time limit. You can leave, then return to the training at any time.
Note: This module follows the rules set out in 4.5(3)(a) from the Health and Safety at Work (Hazardous Substances) Regulations 2017
HSNO Classes (2, 3, 4, 5, 6, 8 and 9) Training
Duration: 60 - 80 mins
Key Topics
Introduction to HSWA, WorkSafe and worker duties
Physico-chemical properties and health hazards
HSNO classifications and degrees of danger
Class 2 flammable gases
Class 3 flammable liquids
Class 4 flammable solids
Class 5 oxidisers
Class 6 toxics
Class 8 corrosives
Class 9 ecotoxic
Procedures (if applicable) for the safe use, handling, manufacture, storage and disposal
Control measures
Personal protective equipment (PPE)
Safety data sheets (SDS)
Emergency actions
Quiz questions (assessment)
Certificates
Certificates are issued once the course is successfully completed
There is no time limit. You can leave, then return to the training at any time.
Note: This module follows the rules set out in 4.5(3)(a) from the Health and Safety at Work (Hazardous Substances) Regulations 2017
HSNO Classes (2, 3, 4, 5, 6, 8 and 9) Training
Duration: 60 - 80 mins
Key Topics
Introduction to HSWA, WorkSafe and worker duties
Physico-chemical properties and health hazards
HSNO classifications and degrees of danger
Class 2 flammable gases
Class 3 flammable liquids
Class 4 flammable solids
Class 5 oxidisers
Class 6 toxics
Class 8 corrosives
Class 9 ecotoxic
Procedures (if applicable) for the safe use, handling, manufacture, storage and disposal
Control measures
Personal protective equipment (PPE)
Safety data sheets (SDS)
Emergency actions
Quiz questions (assessment)
Certificates
Certificates are issued once the course is successfully completed
There is no time limit. You can leave, then return to the training at any time.
Note: This module follows the rules set out in 4.5(3)(a) from the Health and Safety at Work (Hazardous Substances) Regulations 2017
“Very good training. Thanks”
★★★★★
N.P
